No-Cost Combine Inspections

Your combine has one job window a year. A full inspection after harvest finds the worn chain, the tired bearing and the leaking seal while there is still time to fix them on your schedule.

  • X, S and STS Series combines$1,400No cost*
  • Walker Series combines$1,120No cost*
  • Corn heads, grain heads and drapers$350No cost*
A green John Deere X9 combine with a corn head sits in a harvested field under a clear blue sky.
The checklist

What we inspect

Every machine gets the full checklist, and a written recommendation when we are done.

Feeder houseDrive chain, sprockets, idlers and guides, slip clutch, reverser, drum
EngineHoses, belts, fluid levels, fuse panel, exhaust, sealing system
Cooling system
CabHydro and switches, ladder, filters
Grain tankAugers and housings, shafts and bearings, 90-degree gear case
Right-hand sideBelts, tensioners and pulleys, electrical connectors and wiring, clean grain elevator, tailings elevator, cleaning fan
Left-hand sideUnloading auger sump, gears, drive train, sprockets, chopper belts and bearings, sensors, separator, cylinder cleaning, shoe auger and bearings, threshing elements, discharge beater, separator grates, concaves
Corn headsSnouts, height sensor wiring and points; row unit gathering chains; auger drive train and bearing; drive shafts and splines
Flex and rigid headersCutterbar HydraFlex float, sickle sections, header height control, poly skid shoe pads, guards; auger flighting, fingers, tube, slip clutch, drive train; reel fingers, bushings, bearings, cylinders, auto speed; drive shaft, frame, header drop rate, Contour-Master, lights and wiring
Minimum service purchase to qualify

What it takes to qualify

Combines$5,000 minimum
Corn heads, grain heads and drapers$1,500 minimum

Inspection values are Koenig's standard inspection labor prices. Repairs, parts, pickup and delivery are additional, and all repairs are approved by you before work begins.

Add-on services

Add to your inspection

Paid services you can add while your machine is with us. They are not part of the no-cost inspection.

Dyno test (in shop only)$210
Seed meter units$59 per row
Coolant scan (parts and labor)$55
Oil scan (parts and labor)$20
5% off partsOn all parts purchased as a result of the inspection.
Up to 24-month parts warrantyJohn Deere covers parts against defects. Most new OE parts: 24 months or 4,000 hours, whichever comes first, with labor covered up to 12 months when Koenig installs them. Essentials by John Deere parts: 12 months, parts and labor. Normal wear is not covered and terms vary by part.
One per machineOne no-cost inspection per machine, per program season.
Our best value

Save the most with a 3-year agreement

Commit your machines for three seasons and save more than signing up one season at a time.

  • The most savings in the program. Commit for three seasons and save more than signing up one season at a time. Ask your service team what it adds up to for your machines.
  • On-farm service, no travel fee. We waive our $130 travel fee.
  • Bring it in, we wash it free. If you bring your equipment to us, we wash it at no charge.
  • Every no-cost inspection benefit, every year of the agreement.
A Koenig Equipment service truck and technicians are with a John Deere combine harvester in a field.
Harvest terms

No Payment. No Interest.
Until November 15, 2027.

Want to spread out the cost? Finance the repairs your inspection turns up through John Deere Financial, subject to approved credit, and nothing is due until after next harvest.

A female technician inspects a large green John Deere combine harvester in a service bay, using diagnostic equipment.
How it works

Four steps to a field-ready machine

  • Contact your local Koenig service department
  • Schedule your appointment
  • A certified technician completes the inspection
  • Approve the recommended work
Sign up

Schedule your no-cost inspection

Tell us what you run and which store is easiest for you. The service team at that location will reach out to set a date.

Questions

Combines inspection FAQ

What does the combines inspection cost?

The inspection labor is waived when you approve recommended service work of at least $5,000. On its own, the inspection is valued at up to $1,400.

What do you check?

Every system on our combines checklist: feeder house; engine; cooling system; cab; grain tank; right-hand side; left-hand side; corn heads; flex and rigid headers. You get a written recommendation, and nothing is repaired until you approve it.

Is there a better deal than one season?

Yes. The 3-year agreement saves more than signing up one season at a time. We waive our $130 travel fee, and if you bring your equipment to us we wash it free.

How do I pay for repairs?

However works best for you. Financing through John Deere Financial means no payment and no interest until November 15, 2027, subject to approved credit. Every inspection also includes 5% off parts from the inspection and a John Deere parts warranty against defects when we install them. Most new OE parts are covered for 24 months or 4,000 hours, whichever comes first, with labor covered up to 12 months. Essentials by John Deere parts are covered for 12 months, parts and labor. Normal wear is not covered and terms vary by part.