John Deere 318 P-Tier Skid Steer vs. John Deere 320 P-Tier Skid Steer
A straight, spec-by-spec look for compact construction buyers across Ohio and Indiana. The numbers are only half the decision.
Is the John Deere 318 P-Tier Skid Steer right for you?
If you're looking at the 318 P-Tier, you're probably weighing it against the 320 P-Tier, and that's a smart comparison. Most Customers here run a landscaping crew, a small farm, or a contractor outfit, and they want a machine that does real work without being bigger than the job needs. The 320 does lead on raw numbers: 2,190 lb. rated operating capacity against 1,945 lb., 20.7 gpm of pump flow against 17 gpm, and 11.1 mph travel speed against 10.1 mph.
The 318 earns its spot on size. It is 62.9 in. wide without a bucket, compared to 69.5 in. for the 320, which matters on narrow gates, tight job sites, and trailers that are already crowded. It also weighs 6,542 lb. against 7,150 lb., so it's easier to haul and lighter on turf and finished surfaces. It still reaches 120 in. at the hinge pin and 94.3 in. dump height, and it has 33 hydraulic hp at standard flow for everyday attachments.
The 320 makes more sense if you're lifting heavier loads, running higher-flow attachments, or covering ground quickly. If your work is mostly tight access and general loading, the 318 is a strong fit. Either way, you get the same Koenig service network across Ohio and Indiana, genuine parts, uptime support, and strong resale. Stop in or talk with your local Koenig team, and we'll match the machine to your jobs.
| Specification | John Deere 318 P-Tier Skid Steer | John Deere 320 P-Tier Skid Steer |
|---|---|---|
| Rated operating capacity | 1,945 lb. | 2,190 lb. |
| Base machine weight | 6,542 lb. | 7,150 lb. |
| Standard pump flow | 17 gpm | 20.7 gpm |
| Hydraulic horsepower, standard flow | 33 hp | 39.2 hp |
| Travel speed (high) | 10.1 mph | 11.1 mph |
| Height to hinge pin | 120 in. | 122.2 in. |
| Width without bucket | 62.9 in. | 69.5 in. |
| Dump height (foundry bucket) | 94.3 in. | 97.7 in. |
| Fuel tank | 19 gal. | 21 gal. |
Subject to approved credit with John Deere Financial, for commercial use only. Down payment may be required.
Offer details
Offer valid on qualifying purchases made 01 October 2026 through 04 January 2027 from participating dealer inventory. Subject to approved installment credit with John Deere Financial, for commercial use only. Down payment may be required. Average down payment is 10%. 0% APR for 60 months only. Taxes, freight, setup, insurance, fees, and delivery charges could increase monthly payment. Available at participating U.S. dealers. Prices and models may vary by dealer. Offer not available to customers receiving Governmental or Strategic Account discounts.
See them at Koenig
Look at each machine, with Starting At pricing, features and attachments, on its Koenig model page.
John Deere 318 P-Tier John Deere 320 P-TierNot sure which size fits?
Tell us the job, the ground and the attachments you run, and our team will match the right machine to it.
Find Your StoreThe spec sheet is only half the decision
People buy an experience and a partner they trust, not just a machine. With Koenig you also get:
- Performance Edge maintenance — scheduled service, multi-point inspections, genuine John Deere parts, priority scheduling; the 4-year plan adds a year of warranty.
- Parts and service ecosystem — genuine parts, warranty support, certified technicians, and online scheduling.
- Total cost of ownership — John Deere durability, resale value, and uptime often win over the life of the machine.
- A local partner across Ohio and Indiana — a team you can build a relationship around for the life of the equipment.